NEW: incl. extra pack of 1x atomiser, 1x valve ball and 1x lid

The KREA Swiss multiSPRAY has been replaced by multiSPRAY+

Differences between multiSPRAY and multiSPRAY+ are minor.

1. multiSPRAY+ has a 5.5mm-thick piston, versus the thinner 5mm of the old multiSPRAY
2. multiSPRAY+ has a 5.5mm pump housing to accommodate the thicker piston

Krea Swiss is the same familiar brand/manufacturer you’ve known as Krebs. Only the name has changed. The company has not, and neither have its products. They are made by the same people, in the same country, and under the same quality controls.

The Krea Swiss LM25--the multiSPRAY gun--is the perfect food-safe handheld gun for spraying most low- to medium-viscosity liquids including butter, oil, chocolate, jelly, sauces, marinades, fat and egg.

The LM25 includes: Atomiser, valve ball and lid, F7S flat fan nozzle with bent nozzle extension and round jet nozzle R6. Other nozzles also available but sold separately.

Spray Patterns

Bakers love it for the ease of greasing baking sheets and tins and spraying oil and glazes. Fast, economical, accurate and food-industry approved, it's the alternative to the brush or non-food-regulation-compliant paint gun. Used in food factories, bakeries, cake shops, restaurants, butcher stores, hospitals, pubs, hotels, canteens and fast food outlets.

Optimal spraying of flat surfaces and objects like baking trays with the flat-jet-nozzle F7S4. The bent nozzle extension is ideal for spraying upwards, downwards or on edges and slants. Thick to fine spray finish, with excellent material distribution and economical use of material, yielding quick return on investment. Each component designed to comply with EU Food standards, CE Declaration of Conformity and US Food and Drug Administration regulations.

Simple to use. Compressed air not required. Easy to clean and maintain with unique Krebs service screw. Viscosity max (DIN-sec.): 120. (Check viscosity.) Delivery rate max (water): 280 g/min. Dynamic pressure max (bar): 160. Stainless steel piston, tungsten carbide pump cylinder. 700ml container. Flat jet nozzle with tungsten carbide indet number F7S. 1.8m wire length. Made in Switzerland.

Troubleshooting

The Krea Swiss food sprayers are used to apply oil, butter, egg wash, chocolate and viscous food materials, the sprayers provide enormous time and material-usage savings for professionals in food-prep environments. The many thousands of Krea Swiss clients include executive chefs and pastry chefs at the some of the world`s best restaurants, fast food chains and commercial bakeries.

Compare Sprayers

Note: The LM 25 multiSPRAY is not suitable for industrial use.
It must therefore rest at intervals and be used no longer than 3 minutes within any 8-minute period. A maximum of 750 ml of material may be sprayed within a 3 minute period, after which a 5-minute total resting (cooling) period is required before the sprayer may be used again. Should the spray gun be intermittently used for periods of 20 to 30 seconds at a time, then a resting (cooling) period of 5 to 10 seconds is sufficient. Failure to adhere to the usage & resting (cooling) periods will reduce the lifetime of the sprayer.